Oracle Database 19c Installation On Fedora 31 (F31)

This article describes the installation of Oracle Database 19c 64-bit on Fedora 31 (F31) 64-bit. The article is based on a server installation with a minimum of 2G swap and secure Linux set to permissive.

◉ Download Software

Download the Oracle software from OTN or MOS depending on your support status.

OTN: Oracle Database 19c (19.3) Software (64-bit).
edelivery: Oracle Database 19c (19.3) Software (64-bit)

◉ Hosts File

The "/etc/hosts" file must contain a fully qualified name for the server.

<IP-address>  <fully-qualified-machine-name>  <machine-name>

For example.

127.0.0.1       localhost localhost.localdomain localhost4 localhost4.localdomain4
192.168.56.141  fedora31.localdomain  fedora31

Set the correct hostname in the "/etc/hostname" file.

fedora31.localdomain

◉ Set Kernel Parameters

Add the following lines to the "/etc/sysctl.conf" file, or in a file called "/etc/sysctl.d/98-oracle.conf".

fs.file-max = 6815744
kernel.sem = 250 32000 100 128
kernel.shmmni = 4096
kernel.shmall = 1073741824
kernel.shmmax = 4398046511104
kernel.panic_on_oops = 1
net.core.rmem_default = 262144
net.core.rmem_max = 4194304
net.core.wmem_default = 262144
net.core.wmem_max = 1048576
net.ipv4.conf.all.rp_filter = 2
net.ipv4.conf.default.rp_filter = 2
fs.aio-max-nr = 1048576
net.ipv4.ip_local_port_range = 9000 65500

Run one of the following commands to change the current kernel parameters, depending on which file you edited.

/sbin/sysctl -p
# Or
/sbin/sysctl -p /etc/sysctl.d/98-oracle.conf

Add the following lines to a file called "/etc/security/limits.d/oracle-database-server-19c-preinstall.conf" file.

oracle   soft   nofile    1024
oracle   hard   nofile    65536
oracle   soft   nproc    16384
oracle   hard   nproc    16384
oracle   soft   stack    10240
oracle   hard   stack    32768
oracle   hard   memlock    134217728
oracle   soft   memlock    134217728

Stop and disable the firewall. You can configure it later if you wish.

# systemctl stop firewalld
# systemctl disable firewalld

Set SELinux to permissive by editing the "/etc/selinux/config" file, making sure the SELINUX flag is set as follows.

SELINUX=permissive

The server will need a reboot for the change to take effect.

◉ Setup

The following packages are listed as required. Some are commented out as they are not present in the Fedora repository.

yum install -y bc   
yum install -y binutils
#yum install -y compat-libcap1
yum install -y compat-libstdc++-33
#yum install -y dtrace-modules
#yum install -y dtrace-modules-headers
#yum install -y dtrace-modules-provider-headers
#yum install -y dtrace-utils
yum install -y elfutils-libelf
yum install -y elfutils-libelf-devel
yum install -y fontconfig-devel
yum install -y glibc
yum install -y glibc-devel
yum install -y ksh
yum install -y libaio
yum install -y libaio-devel
#yum install -y libdtrace-ctf-devel
yum install -y libXrender
yum install -y libXrender-devel
yum install -y libX11
yum install -y libXau
yum install -y libXi
yum install -y libXtst
yum install -y libgcc
yum install -y librdmacm-devel
yum install -y libstdc++
yum install -y libstdc++-devel
yum install -y libxcb
yum install -y make
yum install -y net-tools # Clusterware
yum install -y nfs-utils # ACFS
yum install -y python # ACFS
yum install -y python-configshell # ACFS
yum install -y python-rtslib # ACFS
yum install -y python-six # ACFS
yum install -y targetcli # ACFS
yum install -y smartmontools
yum install -y sysstat

# Added by me.
yum install -y unixODBC

# New for F31
dnf install -y libnsl2
dnf install -y libnsl2.i686
dnf install -y libxcrypt-compat

dnf install -y http://rpmfind.net/linux/fedora/linux/development/rawhide/Everything/x86_64/os/Packages/c/compat-libpthread-nonshared-2.30.9000-18.fc32.x86_64.rpm

#dnf update -y

Create the new groups and users.

groupadd -g 54321 oinstall
groupadd -g 54322 dba
groupadd -g 54323 oper
#groupadd -g 54324 backupdba
#groupadd -g 54325 dgdba
#groupadd -g 54326 kmdba
#groupadd -g 54328 asmdba
#groupadd -g 54328 asmoper
#groupadd -g 54329 asmadmin

useradd -u 54321 -g oinstall -G dba,oper oracle
passwd oracle

We are not going to use the extra groups, but include them if you do plan on using them.

Create the directories in which the Oracle software will be installed.

mkdir -p /u01/app/oracle/product/19.0.0/dbhome_1
mkdir -p /u02/oradata
chown -R oracle:oinstall /u01 /u02
chmod -R 775 /u01 /u02

Putting mount points directly under root without mounting separate disks to them is typically a bad idea. It's done here for simplicity, but for a real installation "/" storage should be reserved for the OS.

If you are using X Emulation, login as root and issue the following command.

xhost +<machine-name>

Edit the "/etc/redhat-release" file replacing the current release information "Fedora release 31 (Thirty One)" with the following.

redhat release 7

You will need to add the following symbolic links or the Oracle Universal Installer (OUI) will not start.

# Fix for Oracle on F31.
rm -f /usr/lib64/libnsl.so.1
rm -f /usr/lib/libnsl.so.1
ln -s /usr/lib64/libnsl.so.2.0.0 /usr/lib64/libnsl.so.1
ln -s /usr/lib/libnsl.so.2.0.0 /usr/lib/libnsl.so.1

Set up the environment for the "oracle" user. The "$" characters are escaped using "\". If you are not creating the file with the cat command, you will need to remove the escape characters.

mkdir -p /home/oracle/scripts

cat > /home/oracle/scripts/setEnv.sh <<EOF
# Oracle Settings
export TMP=/tmp
export TMPDIR=\$TMP

export ORACLE_HOSTNAME=fedora31.localdomain
export ORACLE_UNQNAME=cdb1
export ORACLE_BASE=/u01/app/oracle
export ORACLE_HOME=\$ORACLE_BASE/product/19.0.0/dbhome_1
export ORA_INVENTORY=/u01/app/oraInvenotry
export ORACLE_SID=cdb1
export PDB_NAME=pdb1
export DATA_DIR=/u02/oradata

export PATH=/usr/sbin:/usr/local/bin:\$PATH
export PATH=\$ORACLE_HOME/bin:\$PATH

export LD_LIBRARY_PATH=\$ORACLE_HOME/lib:/lib:/usr/lib
export CLASSPATH=\$ORACLE_HOME/jlib:\$ORACLE_HOME/rdbms/jlib
EOF

echo ". /home/oracle/scripts/setEnv.sh" >> /home/oracle/.bash_profile

chown -R oracle:oinstall /home/oracle/scripts

◉ Installation

Log into the oracle user. If you are using X emulation then set the DISPLAY environmental variable.

DISPLAY=<machine-name>:0.0; export DISPLAY

Perform a software-only installation either using interactive mode (GUI) or silent mode and run the root scripts when prompted.

# Unzip software.
cd $ORACLE_HOME
unzip -oq /path/to/software/LINUX.X64_193000_db_home.zip

# Interactive mode.
#./runInstaller

# Silent mode.
./runInstaller -ignorePrereq -waitforcompletion -silent                        \
    -responseFile ${ORACLE_HOME}/install/response/db_install.rsp               \
    oracle.install.option=INSTALL_DB_SWONLY                                    \
    ORACLE_HOSTNAME=${ORACLE_HOSTNAME}                                         \
    UNIX_GROUP_NAME=oinstall                                                   \
    INVENTORY_LOCATION=${ORA_INVENTORY}                                        \
    SELECTED_LANGUAGES=en,en_GB                                                \
    ORACLE_HOME=${ORACLE_HOME}                                                 \
    ORACLE_BASE=${ORACLE_BASE}                                                 \
    oracle.install.db.InstallEdition=EE                                        \
    oracle.install.db.OSDBA_GROUP=dba                                          \
    oracle.install.db.OSBACKUPDBA_GROUP=dba                                    \
    oracle.install.db.OSDGDBA_GROUP=dba                                        \
    oracle.install.db.OSKMDBA_GROUP=dba                                        \
    oracle.install.db.OSRACDBA_GROUP=dba                                       \
    SECURITY_UPDATES_VIA_MYORACLESUPPORT=false                                 \
    DECLINE_SECURITY_UPDATES=true

Run the root scripts when prompted.

As a root user, execute the following script(s):
        1. /u01/app/oraInvenotry/orainstRoot.sh
        2. /u01/app/oracle/product/19.0.0/dbhome_1/root.sh

You are now ready to create a database.

◉ Database Creation

You create a database using the Database Configuration Assistant (DBCA). The interactive mode will display GUI screens to allow user input, while the silent mode will create the database without displaying any screens, as all required options are already specified on the command line.

# Start the listener.
lsnrctl start

# Interactive mode.
# dbca

# Silent mode.
dbca -silent -createDatabase                                                   \
     -templateName General_Purpose.dbc                                         \
     -gdbname ${ORACLE_SID} -sid  ${ORACLE_SID} -responseFile NO_VALUE         \
     -characterSet AL32UTF8                                                    \
     -sysPassword SysPassword1                                                 \
     -systemPassword SysPassword1                                              \
     -createAsContainerDatabase true                                           \
     -numberOfPDBs 1                                                           \
     -pdbName ${PDB_NAME}                                                      \
     -pdbAdminPassword PdbPassword1                                            \
     -databaseType MULTIPURPOSE                                                \
     -automaticMemoryManagement false                                          \
     -totalMemory 2000                                                         \
     -storageType FS                                                           \
     -datafileDestination "${DATA_DIR}"                                        \
     -redoLogFileSize 50                                                       \
     -emConfiguration NONE                                                     \
     -ignorePreReqs

◉ Post Installation

Edit the "/etc/redhat-release" file restoring the original release information.

Fedora release 31 (Thirty One)

Edit the "/etc/oratab" file setting the restart flag for each instance to 'Y'.

cdb1:/u01/app/oracle/product/19.0.0/dbhome_1:Y